Report Suspicious Activity
Overview

Specifications

It has a maximum output power of 30W, fluctuation of 30mV with a tolerance

48V PoE Input Voltage:48VSingle OutputPOE48A-05/04 48V PoE, Output 5V 4APOE48A-12/02 48V PoE, Output 12V 2ADual OutputPOE48A-050912D 5V/1.5A, 9V/1.2A & 12V/1APower Cord TypeA=American standard, B=European standard, C=U.K. standardOutput Voltage33=3.3V 05=5V 06=6V 75=7.5V 09=9V 12=12VOutput Current:01=1A 15=1.5A 02=2A 25A=2.5A 1.Power Sourcing Equipment (PSE) transforms AC to DC. It has a maximum output power of 30W, fluctuation of 30mV with a tolerance of ±3%. When it overflows, short-circuits, or overheats, the PSE automatically turns off the power and restarts after these problems are remove.2.PSE applies single chip control management and uses compatible programs. Technical parameters are as follows:3.When PSE detects that it connects to a device which uses no electricity, the power supply will be turned off automatically.4.PSE monitors circuit status at all times. Once it detects that it connects to an electronic device that has a range between 1-30W, it automatically provides electricity to it. When it is lower than 1W electricity will not be supplied.PSE protects circuits from problems such as short-circuit, overload, and electricity receiving device damage by turning off the power once a problem occurs. Normal power supply will be resumed once these problems are eliminated.  PSE Module  : Input : 100-240VAC 50/60Hz 0.6A Power+ Data Out : 1/2 & 3/6 transmit Data 4/5(+) & 7/8(-) output power (48V) Data In : Connects PC/HCB/Switch Weight : 384g Dimensions : 133*80*36mm Case of material : Steel with black painting  PD Module  : Power + Data In : 1/2 & 3/6 transmit Data 4/5(+) & 7/8(-) receiving power (48V) Data Out : Connects Access Point (AP) or electronic device Power Out : 12V/2A Weight : 292g Dimensions : 98*94*34mm Case of material : Steel with black painting